The power of the MAIN BEAM light from this bulb is 100W ( normal bulbs are 60W )
The power of the DIPPED BEAM light from this bulb is 90W ( normal bulbs are 55W )
The power rating is actually the electrical power consumed by the light bulb and is not a true reflection of the light output.
Higher power consumption will in general mean more light output but the other factor to consider is the light colour ( also called colour temperature ). Some energy saving bulbs and street lights produce a very yellow light that is difficult to see detail in clearly. These bulbs however are designed to produce light with a colour temperature of 4000K which is a very sharp white light ideally suited to night driving.
In addition these bulbs have been optimised to reduce the amount of UV ( ultra Violet ) light produced. UV can damage plastic headlight lenses.
Packed in a rugged display case these bulbs are ideal as a spare pair of bulbs to keep in your vehicle etc. ( or you may choose to fit these and keep your original ones in the car as spares )
These bulbs are intended for off road and show use only. E Marked (E4)
Fitting Details
Remove the rubber cap from the back of the headlight and then remove the 3 way electical connector.
The bulb is held in place with a wire clip - release the clip and the bulb can then be removed.
When re-fitting the new bulb it is important not to touch the glass with bare fingers as this can lead to early bulb failures.